How is the placement of traffic signals determined?
Traffic signals don't always prevent accidents. In some instances, total accidents and severe injuries increased after signals were installed. Usually, in such instances, right-angle collisions were reduced by the traffic signals, but the total number of collisions, especially the rear-end type, increased.

There are times when the installation of signals result in an increase in pedestrian accidents. Many pedestrians feel secure with a painted crosswalk and a red light between them and an approaching vehicle. The motorist, on the other hand, is not always so quick to recognize these barriers.

When can a traffic signal be an asset instead of a liability to safety? In order to answer this, traffic engineers have to ask and answer a series of questions:
  • Are there so many cars on both streets that signal controls are necessary to clear up the confusion or relieve the congestion?
  • Is the traffic on the main street so heavy that drivers on the side street will try to cross when it is unsafe?
  • Are there so many pedestrians trying to cross a busy main street that confusing, congested, or hazardous conditions result?
  • Are there so many school children trying to cross the street at the same time that they need special controls for their protection? If so, is a traffic signal the best solution?
  • Are signals at this location going to help drivers maintain a uniform pace along the route without stopping unnecessarily?
  • Does the collision history indicate that signal controls will reduce the probability of collisions?
  • Do two arterials intersect at this location and will a signal help improve the flow of traffic?
  • Is there a combination of the above conditions which indicates that a signal will be an improvement rather than a detriment?
To aid them in answering these questions, engineers compare the existing conditions against nationally-accepted minimum guidelines. Experienced traffic engineers established these guidelines (warrants) from many observations at intersections throughout the country. Where the guidelines were met, the signals generally were operating effectively with good public compliance. Where the guidelines were not met, public compliance was reduced, and additional hazards resulted.

A traffic signal that decreases accidents and improves the flow of traffic is an asset to any community. On the other hand, an ill-advised or poorly designed signal can be a source of danger and annoyance to all that use the intersection: pedestrians, cyclists, and drivers alike.

Show All Answers

1. Why do I have to wait so long for a green light on a side street?
2. How do I report a problem with a traffic signal, lane markings, or traffic signs?
3. What should a driver do when approaching an intersection in which the traffic signal is not working?
4. How is the placement of traffic signals determined?
5. What is a Traffic Signal Warrant?
6. What are the Traffic Signal Warrants?
7. What is the justification for a left turn arrow?
8. How do pedestrian signals work?
9. Is it really necessary for me to push a button to activate the pedestrian signal, or can I just wait for the light to change?
10. Why does it always say "don't walk" before I've completed crossing the street?
11. Can I count on a safe crossing if I carefully follow the pedestrian signals?
12. What are the pedestrian rights and responsibilities when walking along or crossing a street?
13. When is a crosswalk unsafe?
14. Do marked crosswalks provide better pedestrian safety than unmarked crosswalks?
15. Why are the words "walk" and "don't walk" being replaced by symbols?
16. What is the roadside clear zone?
17. Why can't we use speed bumps on our block?
18. Are traffic control devices on private property required to meet State standards?
19. What is Florida law in regard to school speed zones and school buses?